NA-D30 Diesel Automotive Paint Booth – Full-Size Car Spray Booth | CE, FCC certified

The NA-D30 paint booth measures 7000 × 5250 × 3400 mm outside and 6900 × 3900 × 2650 mm inside. The slightly wider and taller footprint gives generous space for sedans, coupes, hatchbacks, SUVs and light trucks, with added room around the vehicle for painters and equipment.

• Outside size: 7000 × 5250 × 3400 mm (approx. 23.0' × 17.2' × 11.2').
• Inside working size: 6900 × 3900 × 2650 mm (approx. 22.6' × 12.8' × 8.7').

For many buyers, this is a “comfort size” full-size automotive spray booth with a bit more headroom and working width.

The NA-D30 uses a high-capacity diesel-fired hot-air burner to bring the booth up to bake temperature quickly and keep it there with good stability. The G20 burner is rated at approximately 180,000 kcal/h for heavier-duty collision workloads.

• Heating type: diesel-fired burner with integrated hot-air heat exchanger.
• Burner model: G20 diesel burner (diesel fuel only).
• Rated capacity: approx. 180,000 kcal/h for robust clear-coat baking performance.

This capacity is aimed at shops that want strong, repeatable bake cycles on larger or more frequent jobs without relying on large electric heating banks.

The NA-D30 is a downdraft automotive spray booth with upgraded intake and exhaust fans. Air is supplied from the plenum above, pulled down through the floor and then out through a centrifugal exhaust fan for stronger, more consistent airflow.

• Downdraft pattern: air is delivered from the plenum above and pulled down through the floor grilles.
• Supply fans: 2 × 4 kW dual fans on the intake side for higher intake power.
• Exhaust fan: 1 × 7.5 kW centrifugal exhaust fan for strong extraction.
• Ductwork: 4 straight ducts plus 90° and 45° elbows to connect into your exhaust stack.

The stronger balanced airflow helps keep overspray heading toward the floor and out of the booth, reducing haze around the painter and helping with consistent finishes.

The NA-D30 combines multi-stage mechanical filtration with activated carbon filter cotton to help control both particulates and paint odors.

• Top filtration in the ceiling area above the booth.
• Vent filtration on incoming make-up air.
• Bottom filtration beneath the floor grilles.
• Activated carbon filter cotton to help with VOC and odor reduction.

With routine filter changes, this chain is designed to support clean refinish work and a more pleasant working environment for painters and nearby staff.

The NA-D30 cabin uses thicker steel facings and a higher plenum and base compared with entry-level booths, so it feels like a premium, permanent installation.

• 50 mm EPS wall panels with 0.42 mm color-steel facing for insulation and rigidity.
• 1.0 mm galvanized roof plate for added durability.
• Approx. 450 mm plenum / purification layer above the booth ceiling.
• 3 floor grilles + 2 patterned plates, or optional full-grille floor layout.
• 300 mm high galvanized base with 1.0 mm sheet thickness.
• Main sheet-metal gate: 3000 × 2600 mm, framed for daily collision use.
• Personnel door: 750 × 1900 mm with customizable colors.
• Equipment box / air unit can be mounted on the right, left or rear side to suit your building.

For visiting insurers, fleet customers and inspectors, the booth presents as a serious long-term asset rather than a temporary enclosure.

The NA-D30 adds both stronger overhead lighting and dedicated side lighting to help painters see metallics, pearls and texture clearly along the sides of the vehicle.

• Overhead: 8 sets of 4 × 18 W LED high-efficiency lamps.
• Side: 10 sets of 1 × 60 W LED lamps along the side walls.

This combination is aimed at reducing missed defects and improving color and texture control, especially on side panels.

The NA-D30 is a diesel-heated industrial spray booth designed to run on three-phase power for fans, lighting and controls, with diesel fuel supplying the burner.

• Total installed electrical power: approx. 16.7 kW (fans, lighting and controls).
• Diesel burner: requires a compliant fuel supply, storage and flue arrangement per local regulations.
• Designed for industrial three-phase power (exact voltage and frequency configured per order and region).
• For the US and other markets, local electrical and mechanical engineers adapt the booth to the available three-phase supply and design breakers, disconnects, piping and cabling to local code.

Final approval always depends on local building codes, fire regulations and environmental rules in your area.

The NA-D30 is aimed at body shop owners who want a diesel-fired full-size booth with stronger airflow, higher-capacity heating and upgraded lighting and filtration compared with basic models.

Typical questions from buyers include:

• “What diesel automotive spray booth gives me stronger airflow and better lighting?”
• “What size paint booth do I need for busy collision work on cars and light trucks?”
• “Will a higher-capacity diesel spray booth help my bake times and finish quality?”

Typical buyers:

• Collision and refinish shops with higher daily car counts.
• Growing body shops investing in a 10–15 year infrastructure upgrade.
• Owners who care about image and long-term durability of the booth structure.
• Shops that prefer diesel heating, strong airflow and better side visibility.

Is this a good automotive spray booth for a busy body shop?

Yes. The NA-D30 footprint, stronger fans and higher-capacity diesel burner are tuned for heavier collision workloads on cars, SUVs and light trucks where you need predictable bake cycles and airflow.

Does this booth work with waterborne paint systems?

Yes. Airflow, heating, lighting and filtration are suitable for modern solvent-borne and waterborne refinish systems when installed and operated according to your paint manufacturer’s guidelines.

Can I install this car spray booth in the United States or other countries?

The booth is designed to be adaptable to different power systems and regulations, including US and other markets. Final approval always depends on local building departments, fire marshals and environmental agencies in your region.

Are the specifications fixed?

No. The NA-D30 platform is continuously updated. Dimensions, components and configuration may change over time or be customized. Always rely on your signed drawings, quotation and installation package for exact, current specs.

Disclaimer: All data on this page is provided as a general reference for buyers comparing automotive spray booths. Specifications, power configuration, components and images may be updated or customized without prior notice.