NA-E30 Electric Automotive Paint Booth – Full-Size Car Spray Booth | CE, FCC certified

The NA-E30 paint booth keeps the same internal length as the NA-E10 and NA-E20 but adds extra outside width and height, making it more comfortable around full-size pickups, SUVs and taller vehicles.

• Outside size: 7000 × 5250 × 3400 mm (approx. 23.0' × 17.2' × 11.2').
• Inside working size: 6900 × 3900 × 2650 mm (approx. 22.6' × 12.8' × 8.7').

The wider footprint and higher cabin help painters move equipment and ladders around larger vehicles without feeling cramped.

The NA-E30 uses the same 8 × 3 kW luxury dual-door infrared heaters as the NA-E20, paired with stronger fans and a taller plenum to help move heat evenly over bigger jobs.

• Heating type: electric infrared (no gas or diesel burner on the booth).
• Infrared heating: 8 sets of 3 kW luxury-version dual-door IR heaters (24 kW total IR power).
• Typical heat-up (factory reference for this platform): around 15–20 minutes from 20–80°C (68–176°F).

The goal is to keep bake cycles fast and consistent even when you are running a high volume of large vehicles through the booth.

The NA-E30 is the strongest electric downdraft booth in this range, with larger supply fans, a larger exhaust fan and more duct sections to handle continuous spraying.

• Downdraft pattern: air is delivered from the plenum above and pulled down through the floor grilles.
• Supply fans: 2 × 4 kW dual fans on the intake side.
• Exhaust fan: 1 × 7.5 kW centrifugal exhaust fan.
• Ductwork: 4 straight ducts plus 90° and 45° elbows to connect into your exhaust stack.
• Equipment / air box location: can be installed on the right, left or rear side to fit the building layout.

The stronger airflow helps keep overspray moving out of the cabin, so vision stays clearer in long or heavy spraying sessions.

The NA-E30 adds an activated-carbon layer to the top, vent and floor filtration chain to help reduce odor and tidy up exhaust air before it leaves the booth.

• Top filtration in the ceiling area above the booth.
• Vent filtration on incoming make-up air.
• Bottom filtration beneath the floor grilles.
• Activated carbon filter cotton in the exhaust path.

This multi-stage filtration is intended to support clean refinish work while also helping with paint smell and emissions at the discharge point.

The NA-E30 is the heaviest-duty electric cabin in this range, with thicker wall steel, a 1.0 mm roof, higher base and an optional full-grille floor for maximum airflow and under-vehicle access.

• 50 mm EPS wall panels with 0.42 mm color-steel facing for extra rigidity.
• 1.0 mm galvanized roof plate.
• Approx. 450 mm plenum / purification layer above the booth ceiling.
• 3 floor grilles + 2 patterned plates on a 300 mm high galvanized base, or optional full-grille floor.
• Main door: sheet metal gate, 3000 × 2600 mm.
• Personnel door: 750 × 1900 mm, customizable colors.
• Equipment box / air unit can be mounted on the right, left or rear side to suit your building.

From a customer’s point of view, the sheet-metal gate, taller base and full-grille option give the booth a more “OEM facility” feel compared with lighter structures.

The NA-E30 combines stronger overhead LEDs with side-wall LEDs to surround the vehicle in light, making it easier to see metallics, pearls and surface defects before baking.

• Overhead lighting: 8 sets of 4 × 18 W LED high-efficiency lamps.
• Side lighting: 10 sets of 1 × 60 W LED high-efficiency lamps.

The wrap-around lighting makes color matching, blend areas and final inspection easier, especially on large vehicles and darker colors.

The NA-E30 is an electric-heated industrial spray booth with the highest connected load in this electric range, designed for shops that run heavy daily workloads.

• Total installed power: approx. 40.7 kW (fans, infrared heat and controls).
• Designed for industrial three-phase power (exact voltage and frequency configured per order and region).
• For the US and other markets, local electrical engineers adapt the booth to the available three-phase supply and design breakers, disconnects and cabling to local code.

Final approval always depends on local building codes, fire regulations and environmental rules in your area.

The NA-E30 is aimed at body shop owners who want a premium electric automotive spray booth for high-volume collision, refinish and custom work, especially on larger vehicles.

Typical questions from buyers include:

• “What is the best full-size electric downdraft spray booth for larger vehicles?”
• “How do I get stronger airflow and better lighting without moving to a fuel-fired booth?”
• “Can I reduce paint odor and overspray while still running a busy collision center?”

Typical buyers:

• High-volume collision centers that need strong airflow and fast turnaround on large vehicles.
• Shops that want a more premium cabin with side lighting, thicker panels and activated-carbon filtration.
• Owners who want an OEM-style look and feel for insurer, DRP and fleet customers.
• Operations that prefer electric heating but still want top-end performance from their spray booth.

How is the NA-E30 different from the NA-E10 and NA-E20?

The NA-E30 adds larger supply and exhaust fans, thicker wall steel, a 1.0 mm roof, a taller plenum, a higher base, optional full-grille floor, side lighting and activated-carbon filtration. It is the most capable electric booth in this range for airflow, structure and lighting.

Is this a good spray booth for full-size pickups, SUVs and vans?

Yes. The wider outside size, higher cabin and stronger airflow make the NA-E30 well-suited for full-size trucks, SUVs and taller vehicles, while still fitting standard passenger cars.

Does the NA-E30 help with paint odor and emissions?

The filtration system includes activated carbon filter cotton in addition to top, vent and bottom filters, which helps reduce paint smell and improve the character of the exhaust air leaving the booth.

Can I install this booth in the United States or other countries?

The booth is designed to be adaptable to different power systems and regulations, including US and other markets. Final approval always depends on local building departments, fire marshals and environmental agencies in your region.

Are the specifications fixed?

No. The NA-E30 platform is continuously updated. Dimensions, components and configuration may change over time or be customized. Always rely on your signed drawings, quotation and installation package for exact, current specs.

Disclaimer: All data on this page is provided as a general reference for buyers comparing automotive spray booths. Specifications, power configuration, components and images may be updated or customized without prior notice.