NA-G30 Natural Gas Automotive Paint Booth – Full-Size Car Spray Booth | CE, FCC certified

The NA-G30 paint booth measures 7000 × 5250 × 3400 mm outside and 6900 × 3900 × 2650 mm inside, giving enough space for most sedans, coupes, hatchbacks, SUVs and light trucks while still leaving room to move around the vehicle.

• Outside size: 7000 × 5250 × 3400 mm (approx. 23.0' × 17.2' × 11.2').
• Inside working size: 6900 × 3900 × 2650 mm (approx. 22.6' × 12.8' × 8.7').

Compared to many standard booths, the NA-G30 offers a bit more width and plenum height, which can help with airflow uniformity and painter comfort around larger vehicles.

The NA-G30 uses a high-capacity natural-gas burner (FS20-type) as the primary heat source. With around 180,000 kcal/h of reference heating capacity, it is designed to bring the cabin from near room temperature up to typical refinish bake temperatures quickly under factory reference conditions.

• Heating type: natural-gas burner (no on-booth diesel burner and no electric infrared package).
• Approximate burner capacity: about 180,000 kcal/h (factory reference, natural gas).
• Supports forced drying of primer and clear coat with gas-fired heat for predictable cycle times.

This suits higher-throughput shops that want stronger gas heat while keeping electrical demand focused on fans and controls.

The NA-G30 is a downdraft automotive spray booth: air comes from the plenum above and is drawn down through the floor grilles to move overspray away from the painter and the vehicle. Larger fan sizes provide stronger airflow and pressure control than entry-level booths.

• Downdraft pattern: air is delivered from above and pulled down through the floor grilles.
• Supply fans: 2 × 4 kW dual fans on the intake side.
• Exhaust fan: 1 × 7.5 kW centrifugal exhaust fan included in the standard package.
• Ductwork: 4 straight ducts plus 90° and 45° elbows to connect into your exhaust stack or treatment system.

Balanced intake and exhaust capacity help maintain consistent airflow and booth pressure throughout the spray and bake cycles, even with busy daily workloads.

The NA-G30 combines multi-stage filtration with an added activated-carbon layer to help control both dust and paint odors in and around the booth.

• Top filtration in the ceiling area above the booth.
• Vent filtration on incoming make-up air.
• Bottom filtration beneath the floor grilles.
• Activated carbon filter cotton for additional odor control and fine overspray capture.

With regular filter maintenance, this chain is intended to support clean refinish work and reduce rework due to dirt or contamination in the clear coat.

The NA-G30 cabin uses heavier-gauge insulated wall panels, a thicker galvanized roof and a raised steel base with configurable floor grilles to feel like a long-term, professional installation.

• 50 mm EPS wall panels with 0.42 mm color-steel facing for added rigidity.
• 1.0 mm galvanized roof plate for increased durability.
• Approx. 450 mm plenum / purification layer above the booth ceiling for improved airflow distribution.
• Floor options: 3 grilles + 2 patterned plates or full-grille floor, on a 300 mm high galvanized base.
• Main sheet-metal gate: 3000 × 2600 mm with bordered panel frame.
• Personnel door: 750 × 1900 mm with customizable color to match your shop image.
• Equipment box / air unit can be mounted on the right, left or rear side to suit your building layout.

The overall look and feel help reassure inspectors, insurers and fleet customers that you’re operating a modern, professionally equipped spray environment.

The NA-G30 is a gas-heated industrial spray booth designed to run on three-phase power for fans and controls, with exact voltage and frequency set per order and region. Burner fuel is supplied by your natural gas service.

• Total installed electrical power: approx. 16.7 kW (fans, controls and auxiliaries).
• Gas-fired heat from an FS20-type burner, using natural gas as the fuel.
• Designed for industrial three-phase power (exact voltage and frequency configured per order and region).
• In most markets, local electrical and mechanical engineers adapt the booth to the available three-phase supply, gas service and safety devices to meet local code.

Final approval always depends on local building codes, fire regulations and environmental rules in your area.

The NA-G30 is aimed at body shop owners comparing larger full-size automotive spray booths for everyday collision and refinish work, with higher airflow and heating capacity than basic models.

Typical questions from buyers include:

• “Do I need a larger natural-gas-fired booth for my collision center?”
• “Will extra lighting and stronger airflow help reduce rework in my shop?”
• “What size booth is best if I’m planning for more volume in the next 10–15 years?”

Typical buyers:

• Collision and refinish shops with growing throughput and demanding cycle-time targets.
• Shops upgrading from an older or smaller booth to support OEM certification or DRP expectations.
• Owners who care about image with inspectors, insurers, DRP partners and painters.
• Operations that prefer gas heating, strong downdraft airflow and integrated exhaust in the base package.

Is this a good automotive spray booth for a busy collision center?

Yes. The NA-G30 footprint, stronger fans and higher burner capacity are tuned for daily collision workloads on cars, SUVs and light trucks where consistent cycle time is critical.

Does this booth work with waterborne paint systems?

Yes. Airflow, heating and filtration are suitable for modern solvent-borne and waterborne refinish systems when installed and operated according to your paint manufacturer’s guidelines.

Can I install this car spray booth in the United States or other countries?

The booth is designed to be adaptable to different power systems, gas services and regulations, including US and other markets. Final approval always depends on local building departments, fire marshals and environmental agencies in your region.

Are the specifications fixed?

No. The NA-G30 platform is continuously updated. Dimensions, components and configuration may change over time or be customized. Always rely on your signed drawings, quotation and installation package for exact, current specs.

Disclaimer: All data on this page is provided as a general reference for buyers comparing automotive spray booths. Specifications, power configuration, components and images may be updated or customized without prior notice.